3 Series E46 325i (M56) TOUR
Remove following parts or loosen them:
-
Dashboard trim panel
-
Front seat
-
windshield
-
A-pillar finisher
Caution!
Remove or cover up other vehicle components in the repair
zone which are at risk from heat, flying sparks and dust.
Determine and mark upper cowl panel cutting line.
Measurement (A) = 140 mm from roof edge.
Measurement (B) = 90 mm from center of bore for trim strip.
1 = Roof edge
2 = Bore for trim strip
Expose and drill out welding spots in windshield frame.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
14.02.2013 14:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -