3 Series E46 325i (M56) TOUR
Tin out and grind down C-pillar joint.
Tin out and grind down D-pillar connection point.
Tin out connection point in side member cover and grind down.
If necessary, coat rear side panel at lower edge of rear light
aperture with tin and grind.
RA Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)
BMW AG - TIS
14.02.2013 15:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
