3 Series E46 325i (M56) TOUR
Close hood lid and check adjustment.
Adjust hood lid to same height on both side walls.
Raise hood lid.
Tighten down lock nut (1) again.
b) Height to side walls, rear
Release screws of hinge on left and right until hinge can be
vertically adjusted.
Close hood lid slowly.
Align height of hood lid to side walls at front.
Point (1) = measurement (A) = 100 mm.
Height of hood lid to side wall: - 0.8
±
0.5 mm,
i.e., hood lid is 0.8 mm lower than side wall.
Hood lid may deviate from specification by 0.5 mm higher or 0.5
lower.
RA Aligning hood lid
BMW AG - TIS
14.02.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -