3 Series E46 325i (M56) TOUR
51 13 402
Removing and installing handle strip (on
trunk lid)
Version from 10/99:
Remove panel for rear lid in rear area.
Feed out wiring harness (2) in direction of arrow from bracket (1).
Disconnect plug connection (3).
Release screws (1) and withdraw handle strip (2) somewhat.
Version from 10/99:
Remove strip handle (2).
Installation:
Tightening torque, 51 13 4AZ
.
Check function.
Version up to 10/99:
Disconnect plug connection (1) and remove handle strip (2).
Installation:
Tightening torque, 51 13 4AZ
.
Check function.
RA Removing and installing handle strip (on trunk lid)
BMW AG - TIS
14.02.2013 15:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -