3 Series E46 325i (M56) TOUR
Note:
Sound insulation (1) is provided with a marking (2) all around.
Butylene tape (3) rests on or inside the marking (2).
Important!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
Adhesive areas must be dry and free of dust and grease.
After cleaning, do not touch the adhesive areas with bare
hands (leakage).
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
Lay 6 mm dia. butylene tape (sourcing reference: BMW Parts
Service) in specified adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
14.02.2013 17:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -