3 Series E46 325i (M56) TOUR
51 71 412
Removing and installing rear spoiler (Touring)
For removal purposes, the trim panel wedge (special
tool 00 9 317) must be present twice.
Without a trim panel wedge, the sprayed bridges tear at the
trim.
Damaged trims must be replaced.
Overview "Set of plastic wedges" (special tool 00 9 310):
1.
00 9 311 Trim remover
2.
00 9 312 Striking wedge, square
3.
00 9 313 Striking wedge, large
4.
00 9 314 Adjustment wedges (2 x)
5.
00 9 315 Gap wedge
6.
00 9 316 Sealing lip wedge
7.
00 9 317 Trim panel wedge is needed twice for this work
8.
00 9 318 Universal wedge
9.
00 9 319 Striking wedge, small
10. 00 9 321 Fishbone
11. 00 9 322 Plastic wedge
12. 00 9 323 Cleaning wedge (scraper)
Open tailgate.
With two special tools 00 9 317 in each case, clip pins (1) of
trim (2) out of rear window frame.
Installation:
Make sure all clips (1) are inserted into sleeves (2).
RA Removing and installing rear spoiler (Touring)
BMW AG - TIS
14.02.2013 17:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -