3 Series E46 325i (M56) TOUR
61 62 030
Removing and installing/replacing wiper arm
on rear window
Spread internal catches (2) as illustrated and remove cover
cap (1) in direction of arrow.
Catches (1) and mounts (2) of cover cap (3) must not be
damaged.
Set wiper arm (1) upwards.
Release nut (2) and remove wiper arm (1).
Installation:
Observe tightening torque, 61 62 5AZ
.
Installation:
Wiper motor must be in end position.
Adjust measurement (A) between wiper arm and rear window
edge.
Measurement (A): 12 mm
RA Removing and installing/replacing wiper arm on rear window
BMW AG - TIS
14.02.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -