Removing and Installing Drive for Slide-tilt Sunroof
E38 from 9/98 for replacement only:
Carry out programming/coding.
Important!
There is a risk of permanent battery discharge if
programming/coding is not carried out!
Note:
After installing/coding drive for actuating slide/tilt sunroof:
•
Initialise slide/tilt sunroof.
RA Removing and installing or replacing drive with gear for actuating slide/tilt su
BMW AG - TIS
14.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -