3 Series E46 328Ci (M52TU) COUPE
renewed.
Background:
The new DME program version tolerates greater sensor gear wobble.
Note:
If the fault entry is repeated after reprogramming the DME control unit with CD15, it
can be assumed that a "real" mechanical fault is present. In such cases, conduct
troubleshooting according to the instructions in DIS.
Parts:
Description
Part number:
Pulse generator, intake camshaft
New part number 12 14 1 438 081
Pulse generator, exhaust camshaft
New part number 12 14 1 438 082
It is not necessary to clear stocks in the parts warehouse.
Mixed installation of old and new pulse generators (inlet and exhaust) is permissible.
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
12 14 92 99 00
This defect code is not contained in the official
defect code catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Replace inlet camshaft pulse generator and
reprogram DME control unit:
Job number
00 52 514
Labour
9 FRUs
Renew exhaust camshaft pulse generator and
reprogram DME control unit:
Job number
00 52 515
Labour
7 FRUs
Renew both camshaft pulse generators and
reprogram DME control unit:
Job number
00 52 516
Labour
11 FRUs
Warranty type
1
Warranty stage
1 (within vehicle warranty)
2 (outside vehicle warranty)
Note:
It is only permitted to make a claim for reimbursement under the above job numbers.
Reimbursement is limited to 36 months/100,000 km and only possible until September
2001.
SI DME fault code 67/68 - VANOS end position regulation E46 M52TU
BMW AG - TIS
14.02.2013 18:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -