3 Series E46 328Ci (M52TU) COUPE
Removing mirror:
Unfasten plug connection (1).
Remove cable (2) from holder.
Press rubber grommet (3) outwards.
Release screws (4) and feed out mirror (5) with cable.
Installation:
Tightening Torque,
refer to Technical Data 51 16 1AZ.
Replacement only:
Because of the thread-cutting screws, the tightening torque
increases by 2 Nm when the mirror is new,
refer to Technical Data 51 16 1AZ.
Installation:
Fit mirror base (2) with sound insulation (1).
Check function.
RA Removing and installing/replacing mirror on left or right front door (Coupé)
BMW AG - TIS
15.02.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -