3 Series E46 330Ci (M54) CONVER
54 21 020
Replacing rubber seal on hard top at rear
If necessary, remove hard top.
Feed out rubber seal (1) of roof molding.
Pull off seal (2) all round.
Installation:
Install seal so that prominent notch (3) points inwards.
Installation:
Feed rubber seal (1) of roof molding into seal (2).
RA Replacing rubber seal on hard top at rear
BMW AG - TIS
15.02.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -