bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing Or Replacing Headlining In Convertible Top|Page 2603 > < 8 RA Removing And Installing Or Replacing Headlining In Convertible Top|Page 2601
Page 4
background image

Release tensioning spring (1) and loose eyelet (2) of lower
tensioning cable.

View from interior:

Release fixed eyelet (1) of middle tensioning cable.

Installation:

Observe course of tensioning cables:

(1)

Fixed eyelet of middle tensioning cable

(2)

Loose eyelet of lower tensioning cable (covered)

Release both eyelets of upper tensioning cable.

Installation:

Observe course of tensioning cable.

Release screws of tightening strap and of complete bow.

Installation:

Observe course of tightening straps.

RA  Removing and installing or replacing headlining in convertible top

BMW AG - TIS

15.02.2013  14:34

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

8 RA Removing And Installing Or Replacing Headlining In Convertible Top|Page 2603 > < 8 RA Removing And Installing Or Replacing Headlining In Convertible Top|Page 2601