3 Series E46 330Ci (M54) COUPE
Version 2
Important!
Risk of damage.
Protect cooler against damage.
Carefully install special tool 11 8 210 .
Screw special tool 11 8 210 to special tool 11 8 200 .
Detach vibration damper by turning spindle (1) on special tool
11 8 210 .
Version 2
Installation:
Check featherkey (1) for damage and correct installation position.
Replace radial seal in lower timing case cover.
Version 2
Installation:
Align groove (1) in vibration damper to featherkey.
Fit vibration damper.
Version 2
Installation:
Replace central screw (1).
Install central screw and washer.
RA Removing and installing or replacing vibration damper (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
