3 Series E46 330Ci (M54) COUPE
Version 2
Installation:
Screw special tool 11 8 190 to special tool 11 8 200 .
Version 2
Insert special tool 11 8 200 in openings on vibration damper
and turn clockwise so that counter-supports snap into place on
vibration damper.
Tighten down central screw (1).
Tightening torque, 11 23 2AZ
.
RA Removing and installing or replacing vibration damper (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
