bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Expansion Tank GS5S31BZ (SMG)|Page 1200 > < 1 RA Removing Hydraulic Pump Relay (SMG)
Page 1
background image

23 42 010

Replacing expansion tank GS5S31BZ (SMG)

Note:

After completing work:

Proceed according to test program.

refer to "Service Functions" in DIS Tester.

Check fluid level in hydraulic system.

Support transmission with a workshop hoist.

Remove transmission cross-member. Remove propeller shaft
from transmission. The procedure is described in the section "
Removing and installing transmission".

Release screw.

Tightening torque, 23 41 7AZ .

Release clamp (1).

Detach hose (2).

Installation:

Replace clamp (1).

Release screw.

Tightening torque, 23 41 7AZ .

RA  Replacing expansion tank GS5S31BZ (SMG)

BMW AG - TIS

15.02.2013  06:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Expansion Tank GS5S31BZ (SMG)|Page 1200 > < 1 RA Removing Hydraulic Pump Relay (SMG)