bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_sealing Or Replacing Transmission Oil Sump (A5S 325Z)|Page 1296 > < 1 RA Removing And Installing_sealing Or Replacing Transmission Fluid Sump (A5S 360R |Page 1294
Page 1
background image

24 11 003

Removing and installing/sealing or replacing
transmission oil sump (A5S 325Z)

After completing work, top up ATF level.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Release drain plug (1).

Drain automatic transmission fluid.

Tightening Torque,

refer to Technical Data 24 11 6AZ.

Unscrew all bolts. 

Remove oil sump (2).

Remove gasket (1).

Clean sealing surface (2).

Installation:

Replace seal.

RA  Removing and installing/sealing or replacing transmission oil sump (A5S 325Z)

BMW AG - TIS

15.02.2013  06:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_sealing Or Replacing Transmission Oil Sump (A5S 325Z)|Page 1296 > < 1 RA Removing And Installing_sealing Or Replacing Transmission Fluid Sump (A5S 360R |Page 1294