3 Series E46 330Ci (M54) COUPE
Apply window adhesive approx. 20 mm high to connection face
(1) on side panel reinforcement spare part.
1 = Bores for clips for securing shaped part to cavity bulkhead.
Apply window adhesive approx. 20 mm high to connection face (1)
on body and to sunroof water drainage pipe.
Fitting shaped part for cavity bulkhead on cars with slide/tilt
sunroofs:
Clean shaped part for cavity bulkhead.
Shaped part for cavity bulkhead (1) is behind water drainage pipe
for sunroof (2).
Fit shaped part for cavity bulkhead (1) on body.
Apply window adhesive approx. 20 mm high to shaped part for
cavity bulkhead and to sunroof water drainage pipe.
RA Replacing rear left or right outer wheel arch section (side panel removed) (E46
BMW AG - TIS
15.02.2013 12:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -
