3 Series E46 330Ci (M54) COUPE
Important!
Only cut through outer metal of B-pillar and remove metal
cutout.
Cut through marked cutting line.
Mark out cutting line for B-pillar reinforcement in cut-open area of
B-pillar (window).
Cutting line lies in center (1/2 A) of cut-out window (A).
Important!
Only cut through metal of B-pillar reinforcement.
Do not cut through B-pillar closing plate.
Cut through marked cutting line.
Expose mating surface for rear window frame and water drain and
drill out welding spots, open brazed seam.
Expose connection points between
-
side window
-
wheel arch and
-
Wheel housing extension
and drill out welding spots.
RA Replacing rear left side panel (partial replacement, C-pillar) (E46 Coupé)
BMW AG - TIS
15.02.2013 13:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
