3 Series E46 330d (M57) SAL
Continue cranking engine in direction of rotation up to TDC
position until special tool 11 2 300 engages.
Caution!
Do not turn the engine back.
Hold crankshaft in TDC position with special tool 11 2 300 .
Place special tool 11 6 321 on inlet camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
Place special tool 11 6 321 on exhaust camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
Remove special tool 11 6 321 from exhaust camshaft.
Remove special tool 11 6 322 .
Remove special tool 11 2 300 .
RA Removing and installing cylinder head (M57)
BMW AG - TIS
15.02.2013 04:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 19 -