3 Series E46 330d (M57) SAL
Replace sealing rings and coat with oil.
Fit and tighten down main flow oil-filter cover.
Tightening torque 11 42 2AZ .
Caution!
A small amount of engine oil will be discharged when the oil
pressure switch is removed. Have a cleaning cloth ready.
Note:
Illustration shows oil pressure switch on a removed engine.
Disconnect plug connection (1) and remove oil pressure switch
(2).
Installation:
Replace sealing ring.
Tightening torque 12 61 1AZ
Install special tool 11 4 050 with sealing ring (1) in place of oil
pressure switch.
RA Checking engine oil pressure (M57)
BMW AG - TIS
15.02.2013 04:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -