bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M57)|Page 741 > < 1 RA Removing And Installing Intake Air Manifold (M57)|Page 738
Page 1
background image

11 62 000

Removing and installing, sealing/replacing
exhaust manifold (M57)

Warning!

Scalding hazard!

Only perform these tasks on an engine that has cooled down.

Caution!

If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.

Fit charge air hoses without grease and dry.

Release screw.

Remove air duct (1) from air cleaner cover.

Remove air duct (1) from intake hood (2).

Release screws (1).

Remove acoustic cover (2).

RA  Removing and installing, sealing/replacing exhaust manifold (M57)

BMW AG - TIS

15.02.2013  04:55

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M57)|Page 741 > < 1 RA Removing And Installing Intake Air Manifold (M57)|Page 738