3 Series E46 330d (M57) SAL
17 11 031
Replacing fan cowl (M57)
Lever out expansion rivets (1).
Press intake hood (2) towards rear and raise a little.
Pull intake hood (2) out of bellows (3).
Installation:
Install intake hood with holders on cross-member of front wall.
Installation:
Check rubber grommets (1) and rubber part (2) of holders
for damage, replace if necessary.
Unfasten plug connection (1) and disconnect.
Detach plug from AUC sensor.
RA Replacing fan cowl (M57)
BMW AG - TIS
15.02.2013 06:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
