3 Series E46 330d (M57) TOUR
Raise intake pipe (1) a little.
Unclip lines (2) from upper bracket.
Detach hose (3) on air cleaner housing.
Unclip lines (1) from lower bracket.
Detach hose (2).
Remove intake pipe (3).
Installation:
Apply a thin coat of petroleum jelly to sealing surfaces of
sealing rings (1).
Insert sealing rings (1) in intake snorkel.
Release clamp (1) on EGR pipe.
Refer to Technical Data 11 65 10AZ.
Release screws (2).
Release screws (3) and remove heat shield.
Remove EGR pipe.
RA Removing and installing, sealing or replacing oil sump (M57)
BMW AG - TIS
15.02.2013 09:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -