bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Coding Control Module (DME _ DDE) > < 3 RA Notes On Handling Wiring Harnesses And Cables
Page 1
background image

12 14 . . . 

Relay assignment, engine wiring harness
(M47, M57)

Read fault memory of DDE control unit.

Switch off ignition.

Note:

Installation location of relays is in electronics box in direction
of travel, left.

Release screws (1).

Installation:

Tightening torque,

refer to Technical Data 12 90 4AZ .

Remove cover from electronics box.

(1)

DDE main relay

(2)

Wiper relay

Remove glow plug relay,

refer to 12 21 500 .

Note:

Read out fault memory of DDE control unit (DDE = Digital
Diesel Electronics). 

Check stored fault messages. 

Rectify faults.

Now clear the fault memory.

RA  Relay assignment, engine wiring harness (M47, M57)

BMW AG - TIS

15.02.2013  10:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Coding Control Module (DME _ DDE) > < 3 RA Notes On Handling Wiring Harnesses And Cables