3 Series E46 330d (M57) TOUR
13 62 610
Replacing crankshaft pulse generator (speed
sensor) (M57)
Interrogate fault memory of DDE control module.
Switch off ignition.
Remove underbody panelling at front.
Pull plug (1) off speed sensor.
Unscrew bolt (1).
Remove speed sensor (2).
Installation:
Prior to installation, apply a thin coat of petroleum jelly to
sealing ring (1).
Mount speed sensor and tighten down.
Switch on ignition.
Check function.
Interrogate fault memory of DDE control module.
Check stored fault messages.
Rectify faults and clear fault memory.
RA Replacing crankshaft pulse generator (speed sensor) (M57)
BMW AG - TIS
15.02.2013 12:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -