3 Series E46 330d (M57) TOUR
Roughly cut out inner wheel arch section and remove.
Closing plate, cover for side member (1), remains on body.
Roughly cut connection point for inner wheel arch section/closing
plate, cover for side member.
Drill out welding spots for inner wheel arch section, at closing
plate, cover for side member.
Expose and drill out welding spots and seams for belt mounting
support.
Expose and drill out welding spots and seams for belt mounting
support.
Remove belt mounting support.
RA Replacing complete rear left wheel arch
BMW AG - TIS
15.02.2013 17:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
