3 Series E46 330d (M57) TOUR
64 12 060
Removing and installing complete electric
auxiliary heater (flow heater)
Disconnect battery negative lead.
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
M47 only:
Disconnect plug connection (1).
Open cover (2).
Disconnect negative and positive leads (3) from electric auxiliary
heater.
Installation:
Observe tightening torque, 64 12 1AZ.
If necessary, disconnect water hoses.
Release hose clamps (1) and detach water hoses.
Installation:
Fill and vent cooling system.
Loosen screws (2).
Lift out electric auxiliary heater (3).
M57 only:
RA Removing and installing complete electric auxiliary heater (flow heater)
BMW AG - TIS
15.02.2013 22:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
