3 Series E46 330d (M57TU) TOUR
Use special tool 00 9 120 for torsion angle tightening.
Tighten down screws (1).
Installation:
Worn rockers may only be reused on the same grooves of the
camshaft.
Oil camshaft bearings and bearing caps.
Install all finger rockers and compensating elements.
Assemble engine.
RA Removing and installing cylinder head (M57TU)
BMW AG - TIS
15.02.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -