3 Series E46 330d (M57TU) TOUR
Evenly release screws of camshaft bearing covers (1) in 1/2 turn
steps from outside to inside.
Remove bearing covers and place to one side in orderly fashion.
Remove inlet camshaft (1) and carefully place to one side.
Remove exhaust camshaft (2) and carefully place to one side.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Remove finger rockers individually and check rollers for ease of
movement.
Note:
E
Inlet camshaft
A
Exhaust camshaft
RA Replacing camshafts (M57TU)
BMW AG - TIS
15.02.2013 14:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -