3 Series E46 330d (M57TU) TOUR
13 53 560
Removing and installing/replacing pressure
sensor on pressure accumulator of fuel
injection system (M57TU, M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove acoustic cover
Important!
Protect alternator against fuel.
Cover alternator with suitable apparatus (risk of damage).
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing/replacing pressure sensor on pressure accumulator of fue
BMW AG - TIS
15.02.2013 14:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -