3 Series E46 330d (M57TU) TOUR
Release and remove bearing pins (1) in direction of arrow.
Note:
Illustration shows E46 S5D390Z transmission.
Lift out shift arm (1).
Installation:
Grease bearing pins (1).
Grease,
refer to BMW Service Operating Fluids.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Slowly relieve tension on clutch slave cylinder otherwise air is
drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Release screw (1).
RA Removing and installing transmission (GS6-53BZ/DZ)
BMW AG - TIS
15.02.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
