bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Windshield Washer Pump For Rear Window Washing > < 5 RA Removing And Installing_replacing Spray Nozzle For Rear Window Wiper
Page 1
background image

61 62 130

Removing and installing/replacing water
reservoir for rear window washing system

Remove flap in trunk trim panel on right,

refer to 51 47 172.

Remove sound insulation.

Note:

Empty water reservoir for rear window washing system.

Unfasten plug connection (1).

Detach filling channel (2) and hose (3) with angle section.

Release nuts (4) slightly.

Release nut (5) and remove reservoir.

Installation:

Make sure hose (3) is laid without kinks after installation.

Replacement:

Fold down windshield washer pump (1) and pull out.

Installation:

Coat sealing ring with anti-friction agent.

If necessary, replace sealing ring.

RA  Removing and installing/replacing water reservoir for rear window washing system

BMW AG - TIS

15.02.2013  23:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Windshield Washer Pump For Rear Window Washing > < 5 RA Removing And Installing_replacing Spray Nozzle For Rear Window Wiper