3 Series E46 330i (M54) SAL
Attach special tool 11 3 244 to special tool 11 3 240 and
locate by way of spark plug thread.
Lift timing chain and hold under tension.
Turn engine from 30
°
before TDC position in direction of rotation
as far as TDC position.
Secure crankshaft in firing TDC position with special tool
11 2 300 .
Important!
Remove special tool 11 2 300 before starting engine.
Automatic transmissions only:
Illustration does not show automatic transmission.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore (1) a large bore (2) which can
be confused with the special tool bore.
If special tool 11 2 300 is secured in the correct bore (1), the
engine can no longer be cranked at the central bolt.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 16:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
