3 Series E46 330i (M54) SAL
Remove reinforcement plate.
Remove front underbody protection.
Grip radiator adjusting screw (2) and undo drain plug (1) on
radiator at bottom.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque 17 11 2AZ
.
Open drain plug (1) on engine block.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque, 11 11 5AZ
.
Adding coolant:
The procedure is described in the section Venting cooling system
and checking for leaks.
RA Draining and adding coolant (M54, M56)
BMW AG - TIS
15.02.2013 23:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
