3 Series E46 330i (M54) SAL
If fitted, detach vacuum hose (1) from vacuum unit (2).
Release nuts on rubber mount of rear muffler on left and right and
remove rear muffler.
Installation:
Install rubber mounts for suspension from body, vibration damper
and both chrome exhaust pipes on new rear muffler.
Installation:
Connect new rear muffler and center muffler by means of
clamping sleeves
Cutting point is in middle of clamping sleeve.
Align exhaust system and clamping sleeves in such a way that
there is sufficient spacing to adjoining components.
Installation:
Check position of end pipes to body cutout.
Tighten down screws of clamping sleeves.
RA Replacing final muffler
BMW AG - TIS
15.02.2013 23:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
