3 Series E46 330i (M54) SAL
Left side of transmission: Disconnect plug connection (1 to 3).
Left side of transmission: Disconnect plug connection (4).
Right side of transmission: Disconnect plug connection (1 to 7).
Support transmission with a workshop hoist.
Release screws.
Tightening torque, 23 00 1AZ .
Important!
Do not allow the transmission to hang off from the
transmission input shaft as this will deform the clutch plate.
Pull out transmission towards rear as far as possible, turn approx.
10
°
counterclockwise and remove.
RA Removing and installing transmission GS5S31BZ (SMG)
BMW AG - TIS
16.02.2013 00:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
