3 Series E46 330i (M54) SAL
23 01 501
Replacing clutch speed sensor GS5S31BZ
(SMG)
Note:
After completing work:
Proceed according to test program.
refer to "Service Functions" in DIS Tester.
Remove heat shield from valve block.
Disconnect plug connection (7).
Release clutch speed sensor (8).
Tightening torque, 23 41 5AZ .
Installation:
To tighten down clutch speed sensor (8): use a hexagon socket
22 A/F, manufactured by "Stahlwille 466".
RA Replacing clutch speed sensor GS5S31BZ (SMG)
BMW AG - TIS
16.02.2013 00:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -