3 Series E46 330i (M54) SAL
Drill out welding spots of B-pillar on cover for side member from
passenger compartment side.
At front seat carrier, drill out welding spots of bulkhead, cover for
side member, from passenger compartment side.
Caution!
Do not use a naked flame for heating!
Fire hazard!
Extract vapors and provide good ventilation.
Location of foam parts,
refer to 41 00 ... Arrangement of shaped parts for cavity bulkhead
Heat foam in following areas:
-
B-pillar
-
Side member cover, rear
Remove side member cover.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
16.02.2013 05:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
