3 Series E46 330i (M54) SAL
Clean connection faces on body and spare part and coat with zinc
dust paint.
Fit inside B-pillar spare part and locate in position.
Gap between seatbelt height adjustment fixtures (A) = 173 mm.
To fit, install seatbelt height adjustment fixture.
Weld reinforcement plate, inside B-pillar.
Weld connection point, inside B-pillar.
Fit individual welding spots so close together that a continuous
seam is created.
Caution!
Combustible foam in welding area!
Avoid overheating.
Extract vapors.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
16.02.2013 05:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
