3 Series E46 330i (M54) SAL
Determine location and mark cutting line on C-pillar.
Dimension (A) = 110 mm from roof edge.
Determine C-pillar separating point in door opening and mark out.
Measurement (A) = 235 mm from square aperture for retaining clip
of trim strip.
Define separating point in cover for side member and mark out.
Measurement (A) = 50 mm from bore for entrance strip (1) with
dia. 5.5 mm.
Measurement (B) = 165 mm from bore for panel for cover on side
member (2) with dia. 9.2 mm.
Cut separating points.
Expose rear window frame and water drain mating surface and
drill out welding spots.
RA Replacing rear left side panel (partial replacement, C-pillar)line(E46 saloon/se
BMW AG - TIS
16.02.2013 06:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -