3 Series E46 330i (M54) TOUR
11 34 552
Removing and installing or replacing all
valves (M52 / S52 / M52TU / M54 / M56)
(cylinder head removed)
Preliminary tasks are described in Disassembling and assembling
cylinder head.
Replace valve stem seals.
Remove valves from cylinder head.
If necessary, check valve guide for wear.
If necessary, ream valve guide.
If necessary, remachine valve seat.
Arrangement:
1)
Valve
2)
Valve-stem seal
3)
Lower plate spring
4)
Valve spring
5)
Top plate spring
6)
Valve tapers
RA Removing and installing or replacing all valves (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 17:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -