3 Series E46 330i (M54) TOUR
Remove cover from injection valves.
Note:
Monitor sensors must be marked, risk of mixing up cylinders 1-3
and 4-6.
Unclip the cable from the retainer. Disconnect plug connection.
Unclip cable on rear side of engine from cable guide.
Note:
Rear exhaust manifold with catalytic converter can only be
removed after front exhaust manifold with catalytic converter
has first been removed.
•
Remove monitor sensor on front exhaust manifold.
•
Remove front exhaust manifold with catalytic converter.
•
Remove monitor sensor on rear exhaust manifold.
•
Remove rear exhaust manifold with catalytic converter.
Installation:
Clean sealing faces, replace gaskets.
Coat threads with copper paste.
Replace nuts.
Tightening torque 11 62 1AZ
.
RA Removing and installing both exhaust manifolds with catalytic converters (M52TU
BMW AG - TIS
15.02.2013 17:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -