3 Series E46 330i (M54) TOUR
13 54 030
Removing and installing/sealing throttle
assembly (M54)
Turn off ignition.
Observe instructions for disconnecting and connecting battery.
Disconnect battery negative lead from battery and lay to one side.
Remove intake filter housing.
Remove intake hose completely (between intake filter housing and
throttle assembly).
Disconnect following plug connections:
(1)
Resonance flap
(2)
Idle-speed control valve
RA Removing and installing/sealing throttle assembly (M54)
BMW AG - TIS
15.02.2013 18:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -