3 Series E46 330i (M54) TOUR
23 42 ...
Removing hydraulic pump relay (SMG)
Release screws (1).
Remove electronics box cover.
Installation:
Correctly install wiring harness with grommet in electronics box
cover (watertightness).
Engage electronics box cover (3) in hinges on underside of box.
Then correctly install upper stop (2) above hinges on underside
of electronics box.
Detach relay (1) with orange ASC lettering.
RA Removing hydraulic pump relay (SMG)
BMW AG - TIS
15.02.2013 20:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -