3 Series E46 330i (M54) TOUR
Slacken nut (1).
Remove shift lever (2).
Installation:
Tightening Torque,
refer to Technical Data 24 51 1AZ.
Unfasten screws and remove position switch from the manual shift
valve shaft.
Installation:
Pay attention to locating pin and cable routing.
Remove radial seal with special tool 24 5 260 from transmission
housing.
Installation:
Fit special tool 24 5 490 to the manual shift valve shaft.
Coat sealing lip of new radial seal (1) with transmission oil.
Slide radial seal onto manual shift valve shaft.
RA Replacing radial seal on manual shift valve shaft (A5S 325Z)
BMW AG - TIS
15.02.2013 20:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -