3 Series E46 330i (M54) TOUR
25 16 ...
Checking/adjusting Interlock/Shiftlock
function
Adjusting interlock (with Steptronic):
Move selector lever (1) to "P" position (front stop of shifting gate).
Release screw (2). The cable (3) must remain easily movable
axially in the holder (4).
Move ignition key to "zero" position and remove.
Press interlock lever (5) downwards as far as it will go.
Tighten down screw (2).
Tightening torque, 25 16 5AZ.
Adjusting interlock (without Steptronic):
Move selector lever (1) to "P" position (front stop of shifting gate).
Release screw (2). The cable (3) must remain easily movable
axially in the holder (4).
Move ignition key to "zero" position and remove.
Press interlock lever (5) downwards as far as it will go.
Tighten down screw (2).
Tightening torque, 25 16 5AZ.
Checking interlock function:
a)
Turn ignition key to "ignition" position and then turn back to
"zero" position and remove ignition key:
It should not be possible for the selector lever to be moved
from the "P" position.
Interlock lever must rest on selector lever.
b)
Turn ignition key to "ignition" position, press foot brake:
It must be possible to select all selector lever positions.
c)
Selecting all selector lever positions except "P":
In none of these positions should it be possible to turn the
ignition key back to the "zero" position and remove it.
d)
Move selector lever to "P" position:
It must possible to turn the ignition key back to the "zero"
position and remove it.
RA Checking/adjusting Interlock/Shiftlock function
BMW AG - TIS
15.02.2013 21:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -