3 Series E46 330i (M54) TOUR
34 32 861
Replacing all brake pipes
Note:
Brake pipes are only supplied straight, in correct length and
fitted with connecting nipples.
Note "General Data",
refer to 34 00 ...
After completing work, bleed brake system,
refer to 34 00 048
New brake pipes must be bent as required using special tool
34 5 100.
Removed brake pipes can be used as templates for bending.
Caution!
-
Protective coat on brake pipes must
not be damaged while bending.
-
Brake pipes must not be bent back and
forth.
-
Watch distances to fixed and movable vehicle parts.
Brake lines may not contact or rub.
-
Tighten brake-pipe couplings
with torque wrench.
Tightening Torque, refer to Technical Data
RA Replacing all brake pipes
BMW AG - TIS
15.02.2013 23:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -