3 Series E46 330i (M54) TOUR
Check initial adjustment of left and right lockpins and adjust if
necessary.
Measurement (A) = 60 mm.
Check stop screw of hood lid hinge on left and right.
The plastic head of the stop screw must not be damaged or
missing; replace hood lid hinge if necessary.
-
Fitting in hood lid:
a ) Gap measurements to side walls
Release screws (1) and (2) of hinge on left and right until hinge
can be moved.
Note:
If the adjusting range is not sufficient, loosen hood lid
mounting bolts on body and adjust hinge on body.
Release screws of hood lock upper section on left and right until
hood lock upper section can be moved.
RA Aligning hood lid
BMW AG - TIS
16.02.2013 01:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -