3 Series E46 330i (M54) TOUR
Move front seat to basic position:
-
Operate actuating lever (1) and snap seat runners (2) into
position by sliding.
-
Operate actuating lever (3) and snap seat cushion (4)
into position by loading.
-
Operate actuating lever (5) and snap seat backrest (6)
into position by moving.
-
Each actuating lever must have clearance until the
mechanism is unlocked
-
If there is no clearance, the mechanism may be in a semi-
unlocked state (risk of injury in event of an accident)
-
If there is excessive clearance, the mechanism may not
unlock completely (no adjustment possible)
Carrying out checks of seat height and backrest inclination
adjustment (danger to life of vehicle occupants):
Check backrest inclination:
-
Front seat must be in basic position
-
Actuating lever (1) must be in zero position
-
Pin (2) must rest against pull rod (3)
-
There must be a clearance (A)
(A) 0 to 0.5 mm
Check seat height:
-
Front seat must be in basic position
-
Actuating lever (1) must be in zero position
-
Metal lever (2) must rest against metal lever (3)
-
There must be a clearance (A)
(A) 0 to 0.5 mm
RA Removing and installing / replacing controls on left / right front seat (normal
BMW AG - TIS
16.02.2013 03:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -