3 Series E46 330i (M54) TOUR
61 61 270
Removing and installing complete wiper
console
Necessary preliminary tasks:
•
Remove cowl panel cover.
•
Remove heater bulkhead.
Unfasten plug connection (1) and disconnect.
Unscrew bolt (2).
Installation:
Tightening torque 61 61 6AZ
.
Installation:
Fit rubber grommet (1) of wiper console on pin (2).
Release nuts and feed out complete wiper console through
opening in heater bulkhead.
Installation:
Tightening torque 61 61 5AZ
.
RA Removing and installing complete wiper console
BMW AG - TIS
16.02.2013 05:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -